Double Claro	Greenish Brown
Claro	Pale Brown
Colorado Claro	Mid-Brown
Colorado	Reddish Brown
Colorado Maduro	Dark Brown
Maduro	VeryDark Brown
Oscuro	VeryDark Brown, Nearly Black

One of the most frequently asked questions we get basically centers around the strength of the many cigars available from Cuba. We have always believed that "strength per se is very subjective and based on personal views - one person may not consider Partagas to be a strong brand while another may think just the opposite

The following Chart is an indication of the comparative strengths of the Cuban brands. It is based on our own smoking experiences and that of our customers

Cigars ranked at 0-4 are considered mild cigars; cigars ranked 4-7 are reasonably medium strength cigars; cigars ranked 7-10 are considered strong cigars. (Guantanamera, the newest cigar from Cuba, is about 4 on this scale)

Before you put any cigars in a new humidor it is important you ensure your humidor interior has been prepped so that a desired humidity level may be maintained. Most cigars are made in the tropical climate of around 70% Relative Humidity (RH) and 70°F, and are best stored in the same condition. Cigars maintained at those levels will remain in perfect condition for years to come with little effort on your part

All humidors sold at Cigar Studio have an interior made of untreated Spanish cedar, the preferred wood for humidifying and aging premium cigars. Spanish cedar is not too aromatic so as to impart a cedar taste to your cigars (like red cedar will). Spanish cedar contains natural oils that allow the wood to absorb and eliminate moisture without warping and cracking. This wood needs to be "seasoned" to activate those oils And to allow humidity to build up to the desired level before the box is ready to hold cigars

Take a new sponge or "J-cloth" - make sure it is unscented and free of soap - and wet it with a liberal dose of distilled water. Wipe down all the cedar, including any trays and dividers and the interior lid. You don't want the water to pool onto the wood but you do want to insure that you have thoroughly dampened it. (Avoid using a paper towel or a fraying cloth; these will literally leave a paper trail on the wood). After you've wiped down the wood, squirt the cloth with more distilled water, and then place it inside the humidor on a plastic bag (to avoid direct contact with the wood) and close the lid.

Next, prepare your humidification device by soaking it in distilled water. Use only distilled water. Tap water contains minerals - calcium and lime - that will destroy most humidification systems by leaving deposits that will clog the humidor element. Once the humidification element is full, be sure to wipe it down to remove all the excess water and give it a little shake to remove loose water

Close the humidor with its humidification element and the damp sponge, and leave it overnight. The next day, refresh the humidification device (it may not need it) and check the sponge. If it is fairly dry, add more distilled water. If it is very damp, leave it alone. Place your hygrometer in the humidor and you will find the humidity indicator rise. Your target range is 68% - 70%. Do not worry about a degree or two off this level. If the level reads 65% and you still enjoy the way your cigars smoke and feel then leave everything alone. If they feel dry to you, wet down the humidification device again. If you find the level too high - 75% plus - you have a couple of choices; keep the lid open for an hour or so or put in a bunch of strip of dry cedar you can obtain from the store

In our experience, it is much better to have cigars maintained at 65% - 70%, than 70% - 75% or higher. A cigar that is slightly dried out can be re-hygrated easily while a cigar that is too moist has a number of potential problems; the draw can be much harder, it keeps going out and in extreme circumstances it can split and be rendered un-smoke able

Sunlight has a great impact on the texture and elasticity of tobacco leaves as well as on the intensity and uniformity of the leaf's color. Tobacco plants designed for use as wrappers often have their direct exposure to sunlight regulated by being "shaded" under cheesecloth "tapados" or covers. Shaded tobacco produces excellent wrappers as the leaves retain a smooth, silken and very even texture and appearance. Shaded tobacco is also less exposed to insect attacks and the detrimental effects of the weather like string winds, heavy rainfall or sleet - all of which could increase the chance of blemishes or damage being caused to the wrapper. Some of the best-shaded tobacco in the world is known as Connecticut Shade. It is an incredibly smooth, brown wrapper leaf used for premium cigars and it is grown in the US in the Connecticut River Valley

Well, yes and no. Yes you can smoke a cigar that has gone out, but NO, do not ever, ever stub it out. Doing so will cause a build up of smoke in the cigar as well as tar and ash at the end of the cigar, both of which will result in a cigar that doesn't taste very good when you relight it. The best way to put out a cigar is to blow out the smoke. Just blow into it for a second or two, and then simply let it go out naturally in an ashtray. When you want to relight it (and remember leaving it too long in the ashtray will cause it to cool and the tar taste to marry with the rest of the tobacco) cut about _ inch off the end with your cutter. This will remove the cold ash and tar residue. Then just light it as you did the first time. While it won't taste like new, your first draws will be much more enjoyable than if it had been stubbed out. Free Tip - If you find yourself rarely having time to finish your cigar, try a shorter length or thinner ring gauge

Great question, especially since a cigar may have little or no tobacco in it from the country in which it is made. A cigar's country of manufacture - where it is made - is what designates its origin. That is not to say that all the tobacco in the cigar comes from that country. In fact, the opposite is often the case, where a cigar made in, say, Jamaica, like the Macanudo, has fillers from the Dominican Republic and Mexico, binders from Mexico and wrappers from the US (Connecticut Shade). When a cigar is made up of filler, binder and wrapper tobacco all grown in the same country, it is known as a puro. The most famous of the puros are cigars made in Cuba where all the tobacco going into Cuban brands comes from the island

The head of the oldest member of the Three Stooges. No seriously, "curly head" refers to the way a cigar is finished when the roller twists the tobacco on the head of a cigar instead of trimming the wrapper and affixing a cap. There are some great cigars finished this way including the Montecristo Especiale, the Cohiba Lancero and the Pimental Guaruja

In most cases cigars, which have been kept out of sufficient humidity for a period of time, can be rehumidified. It depends on how hard and dry the cigar has become. Cigars dry out from the outside inward - first the wrapper will become brittle, then the binder and filler leaves will dry and the cigar will get very hard. Assuming you do not have a humidor - and we can certainly solve this problem for you - there are a couple of things you can do depending on how dry the cigar has become. If the cigar wrapper is brittle but the rest of the cigar still feels spongy (i.e. only the wrapper has become dry and the rest of the cigar hasn't dried out yet), the easiest way to bring the wrapper back is to simply put the cigars in a Ziploc bag and breathe a little air into the bag before zipping it up again. Do this every day and within a week, if not before, the cigar will be back to new again.

However, if the cigar has become totally dry and is very hard, get yourself a small plastic food container. Put your cigars on a paper towel or dishcloth in the container and then place a small dish in the corner. Put a small humipack, or if you really want to use homemade materials, a small sponge on the dish and put very little distilled water on the sponge. The key here is not to allow too much humidity to build up in the container. For cigars that have really dried out, too much humidity too quickly is a killer and will result in the foot of the cigar splitting badly - the dry filler leaves will "suck up" the damp air and expand before the wrapper and binder has a chance to breathe. The other problem you can have if you let too much moisture build up is that condensation could occur on the sides of the plastic container and run down to the bottom - that's why you need to put your cigars on some type of cloth. The best way to employ this method is to add a teaspoon of distilled water to the sponge every two or three days. And have patience. My experience is that within a month, and it will and should take this long to do this properly, most cigars which have dried out will come back to the extent that they are very smokeable and most will taste (almost) as good as new

Non-distilled water, such as tap water (and spring water), contains calcium, chlorine and microbes that can affect both your cigars and your humidification device. Tap water will eventually result in your humidification device getting clogged up thereby reducing its effectiveness - just like normal water will clog up your furnace humidifier. The microbes in tap water can also start to cause mould in your device's sponge and in many cases will result in your cigars getting moldy. Distilled water has no trace elements that can ruin your humidification device, or chemicals that can permeate your cigars.

Absolutely not! It is too cold in a refrigerator for cigars and the relative humidity is far below what it necessary to keep them from drying out. Even if the cigars are cellophaned, the frost-free nature of today's fridges will insure your cigars dry out. If you want to see what will happen to your cigars if you store them there, just remember what that forgotten piece of shriveled fruit or vegetable looked like when you last cleaned the fridge

We hear these terms interchanged all the time. However, each refers to very different but specific stage in bringing tobacco from the fields to the cigar rollers productions bench. Let me try to sort these stages out for you

Curing is what occurs to tobacco right after it is picked. Freshly picked tobacco looks very much like any very large green leaf. These raw tobacco leaves are first sort by size and texture (usually determined from the location on the plant from where the leaf grew) and banded together. These bands are then hung on long poles, which in turn are hung up inside large drying barns. These barns are usually right in the fields from where the tobacco has been grown and it is in these large structures that the tobacco is cured. Curing is the first stage in drying the tobacco out and as it cures, the green chlorophyll in the tobacco turns into brown carotene. This curing stage can take anywhere from four to ten weeks depending on the weather and tobacco

Once cured, the tobacco is again sorted by size, texture, and now, color and taken to a factory where the fermentation stage occurs. Tobacco leaves are placed on top of each other such that huge bales and stacks are created often 5' - 6' square. These are called burros. Because these burros are so large with so many leaves piled on top of each other, heat begins to build up in the center of the burro and the tobacco leaves undergo great chemical and physical changes. This is known as fermentation. As the heat builds up, ammonia, water, and plant sap is released and the starches in the leaves begin to turn into sugars. This fermentation process is very similar to what happens in your compost pile except that experienced workers insure that the leaves never begin to decompose. They do this by carefully monitoring the temperature in the middle of the burros and as heat builds up to approximately 90° - 100° F, the leaves in each burro are rotated from top to bottom and the burro is rebuilt. This process is repeated 8 - 12 times and each time the heat is allowed to build up until it reaches the desired temperature. Eventually the heat build up is less and less with each rotation and fermentation is over. This fermentation stage is also called "sweating the tobacco" as ammonia and water is literally sweated out of the leaves. Fermentation actually changes the characteristics of the leaves as the molecules within the tobacco are broken down. The release of ammonia and other nitrates helps to reduce the nicotine, tar and acid content in the tobacco. Fermentation, which for some tobacco is actually done in several stages, can take 6 - 12 weeks depending on the tobacco (longer if maduro leaf is desired). The tobacco leaves are now ready to be aged.

The tobacco is again sorted and by this time the leaves have been classified such that the manufacturer knows which leaves will be used for filler, binder or wrapper. The tobacco is then repacked into bales, marked and labeled and then put into factory warehouses to age. The tobacco will age for upwards of 1 - 3 years and in the case of tobacco designated for super premium and vintage cigars, up to 5 - 7 years. Ageing the tobacco helps to even out the remaining moisture within the tobacco and mature the leaves until they are ready to go into cigar production.

Following this ageing stage the leaves are almost ready to go into cigar production but these cured, fermented and aged leaves are very brittle and must first be sprayed with a fine mist of water in order to withstand the physical handling of rollers

Note: Just to make sure you are ready when we test you on all this, you may be interested to know that freshly rolled cigars are also aged. After leaving the rollers' bench, cigars are bundled into lots of 50 and 100 cigars and tied with a ribbon. They are then placed into large cedar-lined rooms - their first humidor - where humidity is kept constant and the unique characteristics of the wrapper, binder and filler are allowed to marry with each other (just like the spices and contents in your favorite recipes need to blend together). During this ageing period, which will last 30 - 90 days, the moisture content of the cigars is evened out. Long-aged and Vintage cigars are kept in these rooms longer - Fuente Hemmingways are aged for over 6 months while Davidoff cigars are aged for up to a year and a half

Tobacco leaves designated for maduro cigars start out very similar to other tobacco leaves - they are cured in drying barns. Most often thicker, hardier leaves are used due to the vigorous nature of the fermentation that these leaves must go through. A "natural" maduro is created during this fermentation stage - the temperature within the burro is allowed to get much higher and the leaf stays unturned for longer, and the entire fermentation process goes on longer (than for regular cigar tobacco). The additional heat build up in the burro, and longer time that these leaves are allowed to ferment, results in these leaves getting much darker as more starches turn into sugars. This is why maduros have a slightly sweeter taste (and less "tobacco" taste) as the longer fermentation period results in further reduction in the nicotine content of the cigar

Maduro can also be made through a less natural manner by artificially jump-starting the fermentation process. This can be done in one of two ways: the tobacco can be pressed in large pressure bins where the heat is allowed to build up very quickly, and fermentation will begin and occur faster than normal. The other method involves tobacco being processed in large "sweat" rooms, with almost sauna-like conditions, to fast track the fermentation process. These latter two methods usually produce a heavier tasting maduro leaf

Tobacco grown in most countries can be used for producing maduro leaf. However, Mexican leaf is regarded as one of the very best for maduro cigars. The leaf's natural strength enables it to withstand the rigors of the maduro's extended fermentation